JDM Station

JDM Station Alcantara Style eBrake Boot with Red Stitching

2013+ FR-S / BRZ / 86


SKU: 13FT86EBRAKEALWe price match!

In Stock

Ships today if ordered in
7 hrs 44 mins

Precision cut and stitched e-brake boot.
You will earn Reward Points with this Purchase.


JDM Station Interior

A popular trend in sports cars is the use of Ultrasuede products or Alcantara. This high quality synthetic suede fabric has a unique appearance and feel. JDMS produces quality products to enhance the appearance of your vehicle and their second interior piece for the WRX / STI is a black e-brake boot cover with red stitching.

Give your vehicle a premium look by replacing the OEM leather boot. Removing the trim panel is easy and the JDMS piece is cut in the same shape as the original with appropriate tabs for mounting along the bottom edge.

Installation Notes

Adhesive is required for this install. We recommend a product like 3M Super Trim Adhesive. It comes in a black spray can. READ the directions carefully on the can and do not spray on the JDM Station product. The adhesive is for the plastic frame it will be stretched over. Keep the adhesive off top side of the fabric. This fabric is thicker than the factory piece so just install with that in mind. Remove the original from the plastic frame by tearing it off carefully. Stretch the new product carefully over the frame. The final product will be stretched tightly over the frame to give a factory like appearance. Allow to dry properly before reinstalling. Be CAREFUL not to overstretch the top opening when sliding into position.

FT-86 SpeedFactory's Install Video

3 customer reviews

Average rating
(based on 3 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Looks good

    By Lloyd April 4, 2023

    Hard to install but looks very good

  2. install process

    By Eric July 10, 2017

    i found using the adhesive difficult to do this install so what i did was i used a glue gun for the top / trim piece, this made the install much cleaner. for the bottom part the adhesive was fine to use

  3. Nice quality

    By Nelson February 22, 2017

    another of the couple great details to add to the cabin. Would definitely recommend. i do wish it came with some sort mocked up sort of outline on the inner part of leather. that way the fitting process would go a little smoother. if you're patient enough, which you should be , it should come out great.

Write Your Own Review

Only registered users can write reviews. Please, log in or register


No questions have been asked about this product.

Upload images for this product