JDM Station
Details
- High quality Alcantara style fabric gives premium look and feel
- Precision cut for great fitment
- Custom look for the interior of your WRX or STI
- Unique black e-brake boot cover with red stitching
- Easy mod to personalize your Subaru’s appearance
Quality Alcantara style e-brake boot gives unique look and feel
A popular trend in sports cars is the use of Ultrasuede products or Alcantara. This high-quality synthetic suede fabric has a unique appearance and feel. JDMS produces quality products to enhance the appearance of your vehicle. Subispeed is happy to carry their second interior piece for the 2015-2020 WRX and STI, this Alcantara style black e-brake boot cover with red stitching.
Easy mod to upgrade and customize your WRX or STI’s interior
Give your Subie a premium look by replacing the OEM leather boot. Removing the trim panel is easy and the JDMS piece is cut in the same shape as the original with appropriate tabs for mounting along the bottom edge.
Installation notes:Adhesive is required for this install. We recommend a product like 3M Super Trim Adhesive. It comes in a black spray can. READ the directions carefully on the can and do not spray on the JDM Station product. The adhesive is for the plastic frame it will be stretched over. Keep the adhesive off the top side of the fabric. This fabric is thicker than the factory piece so just install with that in mind. Remove the original from the plastic frame by tearing it off carefully. Stretch the new product carefully over the frame. The final product will be stretched tightly over the frame to give a factory like appearance. Allow to dry properly before reinstalling. Be CAREFUL not to overstretch the top opening when sliding into position.
SubiSpeed Installation Video
Fitment:
- 2015-2020 Subaru WRX
- 2015-2020 Subaru STI
9 customer reviews
-
Would've been nice
Material is good quality. Nice stitching. Too bad this doesn't fit...at all. Its too short, when the e-brake handle is down, it exposes about 1 1/2" of the brake shaft. I did not have any issues getting the trim to fit after, just wish it would would have been long enough.
-
It has it's issues
The material is amazing and it's a lot better than the OEM one. However, it's on the small size. There are two spots were I can see some of the plastic trim, and I have to push my E-brake down to turn off the E-brake light in the panel; as there is not enough fabric.
-
Too small
The quality of the material is great but the fit is way too small. There not enough loose material when you release the e brake and the plastic trim is showing. I might have gotten a bad cut but that’s what I’m experiencing.
-
Not great
The fitment is way too tight for how much thicker the material is than the stock boot, making a prefect fit near impossible. It looks decent at least.
-
Avoid this product
The fitment is horrible. It fits when parking brake is engaged but will pop off either the trim piece or slide off the parking brake handle, when not engaged.
-
Just ok
No instructions or adhesive provided. Like other reviews stated the material is a bit small. Only positive is that it looks good.
-
Better than leather
After installation it need to be stretched a little bit, but I have had this for a couple months now and the quality is still good. Highly recommend!
-
Good Product
Install is slightly more difficult than the other JDM station pieces because the material has to be stretched over the plastic piece that connects the Ebrake to the center console. Install would be easy if they extended the margins of the material a few centimeters. Color is slightly different than OEM, but matches the rest of the JDM station pieces.
-
Great product
Its pretty tough to get it situated where you want it during install but overall it fits well. Time and patience is needed for sure.