SPC
SPC Adjustable Lower Control Arms (Rear) w/ Toe Kit
2015-2020 WRX / STI / 2013+ FR-S / BRZ
Details
This hi-strength adjustable lower rear camber arm provides +/- 2.0 degree of change for the popular BRZ, FR-S, WRX and Impreza. Get the ultimate in performance and handling with this stamped arm featuring our new xAxis(TM) Sealed Flex Joint which performs like a pillow joint but lasts like an OE joint. This kit is easy to adjust with a cam located at the outboard end of the arm. SPC's control arm is the only kit on the market to include an offset toe bushing to increase the range of your factory toe cam. If you need more toe range consider SPC's toe arm #67655.
This is for a pair of arms and two toe kits. Everything you need for the rear.
Installation Video
4 customer reviews
-
Good Product
By Massimo January 26, 2018Easy to mount and to regulate, it seems much stronger than the one from Verus, but the weight is double (total for a kit is 2.5kg).
-
Much needed camber adjustment
By Alexander September 16, 2017Very much OEM quality pieces and fitment was easy. For the cost these are a must even with stock suspension if needed for autoX applications. Not as fine adjustment as a threaded adjuster like other products but does very well for the cost.
-
Back to spec
By TerdBath May 27, 2016I installed these with the RCE yellow springs which give a .8 inch drop all around. Easy to install and enough adjustability to get me back within factory specs.
-
Not a lot of adjustment.
By Tom January 30, 2015After maxing these out I was able to remove about .6 degrees of negative camber. If you are looking for a control arm to adjust camber at the stock ride height these might do it for you. If you need more than that start looking elsewhere. The toe bushing is not fine tune-able. I also felt like the rear slid around a bit more than with the stock control arms. I have already ordered a set of Cusco control and toe arms. I should have just done that in the first place.
