Project Mu

Project Mu B-Force Brake Pads (Front / Rear)

2013+ FR-S / BRZ / 86

$129.67

$0.00
Ships for free in the 48 states
Superior braking force at a low temperature by increasing the initial friction coefficient, sports brake pads suitable for both street sport driving. Imported from Japan. Note: Current lead times for the next shipment is three months (Jan. of 2020) if ordering, please be ready to wait. If not we recommend browsing our other brake pads!
BUNDLE ASSEMBLY OPTIONS

Details

Project Mu B-Force Brake Pads

Introducing Project Mu B-FORCE Brake pads, a Economical Street-Type Brake Pad with Superior Initial Stopping Power. With the clear objective to improve overall performance above that of stock brake pads, the street-type brake pad was developed for street use where initial stopping power and resistance to fading is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to a minimum.

Superior braking force at a low temperature by increasing the initial friction coefficient, sports brake pads suitable for both street sport driving.

Generating a braking force corresponding to the pedal force from high speed to low speed, as much as possible to suppress the vibration and squeal combines the fade-resistant performance and excellent control characteristics, it is also pursuing ease of use as a sport pad. You can experience a sufficiently effect even while the original rotor.

Material will suppress the generation of dust that cause blend, wheel dirt the friction material to the non-asbestos resin. Compared to thorough dust amount of conventional products, and a reduced squeal, also pursuing the ease of handling and overturned so far the concept of the brake pad. Also aggression also be suppressed to some common brake rotor sports pad, with a genuine equivalent of long-life characteristics, but also finish easy to handle in city driving. Low temperature (low speed) even enough frictional force is rising, demonstrate a stable braking force up to about 400 ℃. Also proportional controller Bull characteristics in the pedal force (0.30 ~ 0.45μ) are also ready.

0 customer reviews

Average rating
(based on 0 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product


Feel free to share pictures of your vehicle with this product!