Sticker Fab
StickerFab 3D Carbon Passenger Side Dash Interior Overlay
2020+ Toyota A90 Supra
The all new Supra is setup for modifications, both big and small. Bold and subtle. There are a lot of opportunities to visually enhance the appearance and these inlays add texture and a "Supra" logo in front of the passenger area.
Easy to install. Comes with upper and lower strips + 1 self applied logo.
Details
StickerFab 3D Carbon Passenger Side Dash Interior Overlay
Add some texture of the passenger side dash area with these inlays. Supra logo is included separately. Apply the logo where you want it and then apply the overlay to the dash.
Installation
First decide where to mount the Supra logo on the upper trim piece. It can be mounted closer to the center console or towards the passenger side door. This is completely optional and does not have to be used.
Align the top piece first. Start at the top left corner and work your way to to outside edge or vice versa. The material is pressure activated so when you get it exactly where you want it, this is when you can push down firmly.
See the photos above for a tip to install the bottom piece. Because of the angle, we recommend sticking it to the backing paper to help you insert it into the lower opening. You will apply it in the same manner as the top. Start at one side and work your way over to the opposite side. Press firmly once you are satisfied with the alignment.
