Sticker Fab
Sticker Fab 3D Carbon Inner Door Handle Trim Set
2020+ A90 Supra
Details
Inner Door Handle Trim Set
For whatever reason the trim around the interior door handle gets beat up pretty easily. We have noticed scuffs / dirt in that area. Sticker Fab's carbon vinyl overlays don't show dirt and scuffs as easily, so it should be a great addition to any vehicle.
Material Details
Dragon Wrap™ Carbon Fiber Film is a 5.6 mil calendered vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.
Lasts up to 5 years outdoors.
Care Details: Concept Carbon Fiber film should be maintained to preserve long term appearance using standard aftercare products designed for textured exterior vinyl surfaces. A commercially available protectant such as Armor All or 303 Aerospace Protectant is recommended. DO NOT use waxes of any type.
Installation Notes
Clean the application area and make sure it is clear of any dirt, debris, and/or Armor All. Start in the top corner towards the front of the vehicle. Make sure the coverage in this corner is the way you like it and work your way to the opposite side. Apply evenly without heat. Use your fingers to press down on the vinyl. If it is pretty cold out, we recommend using a heat gun or hair dryer (don't use too much heat) to activate the adhesive. The adhesive is also pressure activated. All you need is to use your fingers though. We don't recommend a squeegee or anything hard. Remember that as you guide the material you can place a small amount of force on it to guide it in the exact direction you need to. Overall alignment from the start needs to be decent, but after that you can get it to cover the visible areas of the trim pretty easily.
