FT-86 SpeedFactory
FT-86 Driver Side Exhaust Delete
2013-2016 BRZ / 2013-2016 FR-S / 86
Details
Got a single exit exhaust on your Scion FR-S, Subaru BRZ, or Toyota GT86 and hate that empty hole look? We have made a cover / block off for open hole.
Made from 22 gauge cold rolled steel, laser cut, formed and then powder coated to stand up to the elements. Easy install with three self tapping screws to attach to the underside of the bumper. Screws will self tap into a non visible area so when you go back to dual exhaust it will still look factory.
Note: Does NOT fit the 2017 model.
*The pic is of the right side, but you will get one for the left side. :)
1 customer review
-
Does the job, but seems a bit pricey
By 3x3 Motorsport May 9, 2023At the risk of sounding cheap, the $90 price tag seems a bit high for what you get. Plus, there wasn't any instructions on the best way to install the exhaust delete. That said, it's not that difficult to install. You get 3 bolts with nylon insert lock nuts. You test fit, mark holes, drill and then install the hardware. There is limited space so you will need a selection of stubby screwdrivers and if you have a "speed" socket with deep socket, it will make it easier to install. I had to do a little adjusting to see about making it fit as best as possible, but there are some uneven gaps, might be my fault.
