GCS

GCS Smoked 4th Brake Light / Reverse Light

2013+ FR-S / BRZ

$122.00

SKU: GCS-SMOKED-4BLWe price match!

In Stock

Ships today if ordered in
12 hrs 30 mins

This complete replacement housing fits in the spot where your reverse lights are. Other models come with a 4th brake light in the center, however this is not present in USDM models. Rather than hacking your stock housing, you can replace it with a GCS 4th Brake Light which houses reverse, brake, and parking lights. Supplied with the wiring are tabs to connect the housing to the stock mount points.
You will earn Reward Points with this Purchase.

Details

GCS Smoked 4th Brake Light / Reverse Light


This complete replacement housing fits in the spot where your reverse lights are.

Other models come with a 4th brake light in the center, however this is not present in USDM models. Rather than hacking your stock housing, you can replace it with a GCS 4th Brake Light which houses reverse, brake, and parking lights.

Supplied with the wiring are tabs to connect the housing to the stock mount points.

Wires

Black - Ground
Blue - Brake Positive
Green - Reverse Positive
Brown - Parking Positive

FT-86 SpeedFactory Install Video

6 customer reviews

Average rating
(based on 6 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Great lights

    By Jonathan February 3, 2023

    I have a 2013 Frs, but the wiring for me was a bit tricky. Even with the video provided above it did leave out some things I managed to figure out. Plug in the 3 wires corresponding to each color. Than proceed with the extra provided blue and black wire tap it to the blue connection where you previously either cut or removed the rubber grommet connecting to your new harness. And like the video mentions either ground the black wires to a chasis or like I did just to the tailight black wire. The brown goes to the red which is the brake light and the blue which you already taped to make your led v strip get power goes to the green wire on your tailight harness. With that everything should light up smoothly. Hope this helps anyone wanting to get these lights because they look amazing.

  2. Good

    By aigra October 5, 2022

    The wiring was really easy the provided hardware works fine. You have to watch YouTube videos to figure out which wires to splice to as the BRZ and FRS seem to be different. Fitment is 8/10 but it looks dam beautiful

  3. Looks great

    By Brandon September 29, 2022

    This piece makes the rear end look so much better!

  4. Great buy

    By Fitment September 3, 2022

    Wiring part was a little difficult but worth it

  5. Good quality product

    By K_vin January 30, 2022

    Product works as described - good quality, recommended

  6. Difficult installation but worth it

    By Jesse October 3, 2019

    The fitment was great but the electrical wiring part was a little difficult, only came with disco splice clamps, it needed a Male splice t tap connector as well which didnt come with the package, other than that it looks great!!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

QUESTIONS & ANSWERS

No questions have been asked about this product.

Upload images for this product