GCS

GCS RGB Interior Footwell Lighting Kit (Front & Rear W/ Bluetooth)

Universal

$72.00

SKU: GCSRBGINTWe price match!

In Stock

Ships within 24 hours

Interior footwell lighting is a great addition to any vehicle. This kit includes 4 separate light strips to illuminate both the 1st and 2nd row of seats.

Note: When installing light strip on the seat rail, double check the clearance when the slider is in the farthest back position, before applying 3M adhesive.

You will earn Reward Points with this Purchase.

Details

Interior Lighting for the Entire Vehicle

With factory interior lighting kits costing over $100, GCS brings an easy to install kit to the market that will provide light for both 1st and second rows of seats.

This kit comes with all you need to complete your installation. 4 strips of lighting include 4 runs of wire which you will connect to the controller box. This box connects to your smartphone via an Android or iOS application. You can choose preset colors, choose your own color, or let the lights dance to the beat of the music.

To make the installation even easier, an add a fuse is included so you use the 12v plug fuse inside the cabin to power the kit. In this area there are bolts which mount to the chassis that can provide a ground for the system.

Includes both cigarette lighter and hard wiring connectors (preferred method). Bluetooth connectivity prevents the control device (smartphone) from losing its Internet connection while controlling the RGB lighting system.


Installation

The included add a fuse makes installation a breeze.

  • There are two types of add a fuses included. Select the appropriate one for your installation and place the included fuse in the top slot.
  • Note an appropriate fuse by using the diagram we have provided. For these vehicles, the fuse box is located in the driver's side *dash area.
  • Pull the fuse out from that location and install it on the bottom slot of the add a fuse.
  • Insert the red wire from the RGB LED controller box power wire in the blue portion of the add a fuse and crimp the connection.
  • Insert the add a fuse in the slot you removed the fuse from earlier.
  • Locate a bolt which can act as a ground post. Use the for the black wire on the RGB LED controller box power wire.
  • Insert this power wire in the controller box. Run the rest of the wiring to the mounting locations for the LED strips, mount them, and connect the wires to the RGB controller.

*The WRX / STI / Crosstrek / Forester have a fuse box door that faces the driver. The FR-S / BRZ / 86 have it located under the dash.

Try to avoid turning the vehicle to accessory power before starting. Restarting the RGB controller quickly can result in loss of bluetooth connectivity.


FT86SpeedFactory Install Video - FR-S / BRZ / 86

Subispeed Install Video - 2015+ WRX / STI

Note: When installing light strip on the seat rail, double check the clearance when the slider is in the farthest back position, before applying 3M adhesive.

Downloads

iOS users can find the application in the app store.

Android users, please downloaded the latest file here. You will have to allow installations from unknown locations on your device.

27 customer reviews

Average rating
(based on 27 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Wack stick

    By Impreza me December 3, 2021

    Brought these after buying some nice rims and wanted to really to make the inside of the car look cool too but a week after install both led strips are on my floor mate.I was debating get a led kit in the first place but ig I should’ve went with the 15 dollar ones.don’t buy if they won’t stick to car

  2. Adhesive could be better

    By Luis September 25, 2021

    I have to say 1st and foremost this is a pretty straight forward install if you are using the tap for the fuse box. As with everyone else the hardest part was getting wires to the passenger side. The only downfall to this kit is the adhesive. I live in AZ and the heat here just melts it causing it to fall off between drives or the vehicle sitting outside for long periods of time. I literally have to get in and reattach it every time I drive it. The tape they use may be similar to 3m but isn't the heavy duty stuff, so i will be removing it all and using HD 3m tape. This is one of the reasons I wont bite the bullet and purchase the Subiespeed gurney flap that uses the same tape as I don't want it flying off on the freeway due to the same heat. All in all its a great product and works great. The app is useful but wish there was a way for it to play my music w/o the screen being on the phone in order to have access to the Mic.

  3. Difficult but amazing

    By Miles September 3, 2021

    A little complicated and a lot painful. However, the turn out amazing.

  4. Great product with some futzing

    By Mike August 1, 2021

    Lights and the kit has everything you need and hooking everything up, running lines, where you need to out the lights in your car all make sense and is done in a relatively short time. I don't know if my kit was old though, because the adhesive backing on every light just WOULD NOT STAY STUCK. I cleaned all the surfaces with paper towels, alcohol, and wiped them down with fresh paper towels when done. They would fall each time. Had to go to Advance Auto and get some 3M tape to replace the backing on these lights. Once I did that everything was smooth sailing. Overall happy, but having to spend an extra $12 to get the product installed for something that should have worked out of the box was disappointing.

  5. 1 of 4 LED Light Strips Don’t Work

    By Kerwin June 14, 2021

    I’ve contacted Subispeed about receiving this product and one of the LED strips does not work. I tried connecting the strip to all four power source connections without any luck. I think it’s just a defective part. The other 3 strips work fine and all respond to bluetooth app. Hoping to hear from Subispeed soon. For now one of my rear seats won’t have footwell lighting. Other than that, good product for the price!

  6. One of four LED light strips not working

    By Kerwin June 14, 2021

    I’ve contacted Subispeed about receiving this product and one of the LED strips does not work. I tried connecting the strip to all four power source connections without any luck. I think it’s just a defective part. The other 3 strips work fine and all respond to bluetooth app. Hoping to hear from Subispeed soon. For now one of my rear seats won’t have footwell lighting. Other than that, good product for the price!

  7. Super easy and looks fantastic

    By Trevor February 28, 2021

    Only had an issue with the driver side lights. The connector portion kept drooping down and catching my leg. I used some hot glue and a clamp to get it set and now its perfect.

  8. Fuse Box problem

    By Tomas December 11, 2020

    The lights were great, installing them throughout the car was pretty much easy, but powering them through the fuse box was the problem. I followed the video thoroughly but the lights wouldn't turn on with the car. Their was one spot in the fuse box where the lights would always be on, so I knew everything else was done correctly. I didn't want the lights to be on forever so I ended up installing them in the glove compartment. Even with the trouble overall I do think it was worth the money

  9. Subtle Detail That Goes A Long Way

    By Alex December 6, 2020

    I was worried about this product not being able to work with my 2014 WRX hatch, but after a quick email response from Subispeed I was informed that this kit is basically universal. I actually opted to run the wiring through proper wiring channels/center console so it took a little longer than just tucking it away, but it made it look like it was factory standard. Speaking of, I was able to match the color, tone, and even brightness to the existing lighting using the bluetooth app. The ONLY downside to this kit is that the pre-installed adhesive is garbage and never really stuck to begin with. Make sure you have your own 3M double-sided tape ready.

  10. Worth it!

    By Steven November 23, 2020

    Wiring wasn't bad, took me and my buddy about 15 minutes. The biggest struggle for me was the double sided tape it comes with is probably the worst ive ever used so i had to use my own means to stick them on. Other than that its great light, app works great and paired within seconds of turning it on.

  11. Goodish

    By Julia October 12, 2020

    I love the lights and it was super easy to install with the video! however, even after allowing the lights to set, they would not stick at all

  12. honestly worth it

    By Jerry A. October 11, 2020

    I bought this after watching the youtube video and there was practically minimal effort when installing these. it was pretty simple and having the video as a guide makes it too easy. And the lights themselves look very good and I love the ease of changing them by using the app. Definitely a good purchase to upgrade the interior.

  13. Tricky Install, Great Results

    By Jimbo July 26, 2020

    Although the video shows it’s easy to pass the wires through the center to the passenger side, that ends up being the trickiest part! Also hooking everything up properly and knowing where to place the Bluetooth receiver was also not shown in the video. But overall once everything was installed, the all was easy to follow and the lights look great! Definitely recommend!

  14. 8.5/10 Easy install / Looks good

    By Alexander April 4, 2019

    The installation was easy, took maybe 30-45 min to install, the fit was almost on point but the double tape or glue that comes with it sucks, I had to use better double tape the 3m was weak and fall off after 2 days but overall I'm super happy how it works and looks soo good and for the price this is something you should go for

  15. Great product !!

    By Anourak December 20, 2018

    Great product ! Easy install ! completely satisfied )) (y)

  16. Great product, easy but exhausting install

    By David November 12, 2018

    I love the lights and features. Pretty simple install, I chose to hardwire it. As a bigger guy I found myself in some pretty crazy yoga poses but it ended up being worth it. Cool to the music color changing feature. Back ones are bright enough mounted on the rail, but might try the velcro solution proposed above.

  17. 10/10 would buy again

    By Stuwie July 10, 2018

    it was very hard to install the passenger side front lights (you had to feed it through the dashboard) other than that it was fairly easy just make sure you follow the YouTube video.

  18. Simple addition for alot of personalization

    By Matt March 20, 2018

    Install was very easy, the youtube video definitely helped and once they were all up in running, I was definitely happy with my purchase. A few very minor things I noted: the adhesive needed a bit more pressure to really set when applying to the plastic in the front as opposed to the rear which mounted on the metal seat rails. Also, the LED strips came wrapped in a saran wrap type plastic which took some practice/figuring out to get it off without simply shredding. Still a solid choice!

  19. Looks great

    By Jim March 19, 2018

    Installed this as opposed to the OEM product which is only offered in red or blue. Way better price and much more versatile. Installation was straightforward. Only frustrated by poor quality zip ties which were dried out, fragile and kept breaking. Would recommend

  20. Bright

    By Mario March 3, 2018

    These lights can be pretty bright (they are able to be dimmed via the Happy Lighting app) and the installation wasn't too bad. Its a little bit of a pain fishing the wire through the back of the console to the passenger side. Also be prepared to get into some wierd angles when you are tucking and throwing on zip ties to get the wiring out of the way of the petals. One very important note for people like me who have never wired anything in my life. When you crimp the box wire to the Add-A-Fuse wire, make sure you first strip the Red wire about half an inch so that the wire is exposed and then carefully push it all the to the center of the blue tap. I got too excited and just crimped it without stripping..... Don't be an idiot like me.

  21. Better than OEM

    By Stephen February 7, 2018

    My summary is true. I had OEM foot well lighting and GCS not only has more customization its $20 cheaper. The most bang for your buck!

  22. Great LED Lights!

    By Abraham November 3, 2017

    These look great at night, they look good during the day but at night they're fantastic! Took me around 30-40 minutes to install but was just because I'm a big guy and it was hard trying to run the cables and zip tie the wires and stuff. Although, it wasn't all that hard to install them. The only issue I ran into was that I had a lot of slack left over but I mean that's not necessarily a bad thing, you could find ways to make use of all the slack. I would rather have more than not enough. I just had to zip tie all of it and tuck it underneath the dash with all the other cables. Overall, I'm really pleased with these lights! Took literally seconds for the app to recognize them and they have no lag when I'm going through colors. The app is really nice too, it has pre-set modes if you want them to change color by themselves and stuff.

  23. Looks Good, just be ready for the installation.

    By Chris August 3, 2017

    I ordered this a little while ago for my 2013 FRS, and I must say, it adds something that no other product can add. Installation was easy, but time consuming moving wires about through the small spaces of the FRS, but I am extremely pleased with the outcome, would certainly recommend.

  24. Easy install

    By Cristian June 3, 2017

    Nice lights for your interior at night. It was simple to install because of the youtube video so just follow it.

  25. Great product/easy install

    By Austin May 22, 2017

    Great look to the interior at night. Lots of different modes. Easy install just follow the YouTube video they have.

  26. easy install, looks awesome!

    By VU May 22, 2017

    took me 20 minutes to install it. the subispeed video helped a lot. the bluetooth function is really cool once i found out which app to download (happy lighting in the IOS store). changing the color to whatever i want gives the car an extremely personable feel.

  27. Worth the work

    By Cade January 9, 2017

    I ordered these for my 2014 Forester and the end result is well worth the work. The wiring was a bit of a pain but nothing to difficult. My problem was with the adhesive on the back of the led strips, it would not stick to anything, i had to resort to my own means of attaching them, however after all that was done with, they paired to my phone just fine and work well and are very responsive. Currently my favorite mod to date!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

QUESTIONS & ANSWERS

No questions have been asked about this product.

Upload images for this product