Halogen lights produce a lot more heat vs light when compared to an HID kit. You can run a lower wattage HID kit and get more light output. In addition to this, you have the option to pick various light temperatures to improve your night time driving experience.
NOTE: Fits ONLY 2013-2016 Scion FRS.
This OLM kit comes ready to install and works with headlights that use an H7 bulb. This includes the aftermarket Winjet and Spyder headlights for the Scion FR-S.
Halogen lights produce a lot more heat vs light when compared to an HID kit. You can run a lower wattage HID kit and get more light output. In addition to this, you have the option to pick various light temperatures to improve your night time driving experience.
The AC ballast included provides the HID bulbs with a much more stable current than DC ballasts offered by many competitors.
OLM bulbs are available in a variety of colors to suite your desired output. They have a lifespan much longer than halogen bulbs. You'll get around 2500 hours out of them.
Warranty: 1 year
Ballast Type: AC flicker free
Ballast Details: IP54 (silicone enclosed electronics)
Approximate Light Output: 3400 lumens
Includes 3M double sided adhesive for mounting the ballasts.
With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.
Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.
There are a few common errors during the installation of these kits. One is the polarity of the wires. Please make sure that the factory ground wire (black) is always connected to other black wires and the red wires are connected to red wires. Also, there whenever there is a (+) symbol on the ballast connector, make sure it is paired with the red wires. Black wires will be paired with (-) symbols.
Also, the extension / adapter wires can be pushed out of the socket when connecting them to the factory H11 plug. Please make sure these wires are firmly seated in the base of the plastic plug. This adapter is required because the ballast connector is not an H11 socket. It's similar, but the extension / adapter will make a much better fit. A picture of this plug is available in the additional tab at the beginning of this product's description. You can also view this video on the topic below.
SubiSpeed only offers HID relays when they are possibly required. We have tested the current draw of this kit and found that it does not exceed the factory wiring.
It is not recommended that you touch the glass portion of the bulb for any reason. Oils from your hands can cause the bulb to shatter once it heats up. Handle the bulb by its base only.
