Recently added item(s)
We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Kartboy 12mm 0.750" Extended Exhaust Hangers
2015+ WRX / 2015+ STI / 2013+ FR-S / BRZ
Price is per hanger. You will need 5 to replace all of the OEM hangers.
Kartboy extended exhaust hangers give you the extra room you need with some exhaust installations. When your exhaust system does not have enough clearance, Kartboy extended hangers lower the exhaust system by 0.750". This can help prevent tips and other components from rubbing or melting nearby plastic pieces.
They're made out of polyurethane instead of the soft rubber that OEM hangers are made out of. This will help your exhaust system stay in place for a long time.
Fits:Scion FR-S Kartboy 12mm 0.750" Extended Exhaust Hangers
Scion FRS Kartboy 12mm 0.750" Extended Exhaust Hangers
Subaru BRZ Kartboy 12mm 0.750" Extended Exhaust Hangers
Toyota GT-86 Kartboy 12mm 0.750" Extended Exhaust Hangers
|Additional Warranty Information||None|
Kartboy 12mm 0.750" Extended Exhaust Hangers / KB-011-12MMXL Fits
6 customer reviews
Carbon fiber driveshaft
I bought 6 hangers in order to push the exhaust central silecer a bit mor far to the Velox carbon driveshaft and it works!!! Now it didn touch it anymore. Those hangers are harderer than the OEM, now the exhaust don't moove!!! Very good solution
my exhaust was hitting my diff so i used the hangers to lower it off my diff worked great seems to be really strong.
Quick lowering of exhaust.
My exhaust was hanging way to high after putting an aftermarket one on. Need extenders of some kind and these did the trick. Took 30 mins for me to install.
Fixed my issue....
Was running OEM length polyurethane hangers and ran into an issue where the exhaust tips on my Q300 were rubbing/hitting on my C-West rear lip. Purchased these extended Kartboy hangers and it fixed my issue. Doesn't hang too close anymore to risk melting my rear lip, and it doesn't hang too low to where it looks like I'm going to be dragging my exhaust everywhere. If you have the same issue I had, these are a definite must.
Super hero of hangers
Literally the Hulk of all hangers. If you want something strong that will hold up and not flex under pressure then this is what you want.
Saved my driveshaft
MUST HAVE if you have a one piece drive shaft and a aftermarket exhaust. Drove around for a month trying to figure out what the noise was. Forgot how low the clearance between my invidia n1 mid pipe with my driveshaft shop one piece aluminum drive shaft. Long story short there's a slight grove on the driveshaft. But these fixed my problem.