AVO Turboworld
AVO Turboworld Silicone Intake System
2013+ FR-S / BRZ / 86
Details
AVO Turboworld Silicone Intake System
Silicone Inlet Pipes provide better flow and excellent durability compared to stock. Even on stock turbochargers the increase in air flow is welcome, and on large turbochargers they are practically necessary. Our multi-layer reinforced and wire reinforced inlets are the standard that others attempt to copy. AVO's reinforced silicone inlet kits are essential for getting the most air to the turbo.
Combine it with the AVO Power Air kit or other pod-style intake systems to provide the airflow the turbo demands. Comes in a choice of 3 colors to help you customize your engine bay. Our wire-reinforced silicone inlets for the 2001-2007 WRX and STI models was recently redesigned at the turbo side with a larger "kink", allowing for better fitment around the TGV's.
Our inlets for the newer models are as large as you can go without creating clearance issues. They come with steel adapters to match up to the stock MAF hose if necessary. 5-ply reinforced silicone construction keeps them from collapsing under pressure. Our reinforced Short Silicone Inlet Pipe fits between the stock airbox and the turbo inlet pipe. Remove the old "accordion" style hose and replacing it with our design has shown an improvement in air flow thanks to it's smooth inner design.
1 customer review
-
Quality Noise Generator Tube
By Joshua December 27, 2017This is a quick and simple install that looks much better under the hood than the factory stock tube. When I installed mine it rested slightly on the radiator tube but by rotating the silicone tube on either end slightly and then tightening the clamp it quickly gave the two tubes clearance.
