ISC Suspension V2 Basic Street Sport Coilover Kit (With Triple S Upgraded Coilover Springs) - 2013-2021 Scion FR-S / Subaru BRZ / Toyota 86

The product images shown are for illustration purposes only and may not be an exact representation of the product.

 

 

 

 

ISC Suspension V2 Basic Street Sport Coilover Kit (With Triple S Upgraded Coilover Springs) - 2013-2016 Scion FR-S / 2013-2021 Subaru BRZ / 2017-2020 Toyota 86

---

Simplified Performance Package - V2 Basic Coilovers

The ISC V2 Basic coilover has all the great features of the ISC V2 N1 kit, except for rubber isolated top mounts which replace the camber plate or pillowball application in the front. The ISC V2 Basic was created to streamline the product and eliminate unnecessary features for everyday street cars that are not focused on track performance or extreme camber/stance. Adjustable camber plates may not be necessary for most street enthusiasts, allowing us to offer the ISC V2 Basic coilover at a lower cost while maintaining the same level of quality.

 

Features:

• Includes Triple S Upgraded Coilover Springs
• Designed for street enthusiasts
• Retains ISC N1 features: 32-way damping, full height adjustability, mono-tube dampers, premium hardware
• Exception: No adjustable top camber plates
• Replaced with gold anodized aluminum top plate with rubber top mount
• 100% rebuildable for longevity
• For 2013-2016 Scion FR-S / 2013-2021 Subaru BRZ / 2017-2020 Toyota 86 Models

 

Street Sport Version 2

The ISC Suspension V2 Basic Street Sport Coilover Kit is the perfect choice for street enthusiasts, offering both adjustability and affordability. With 32-way adjustable damping, full height adjustability, and mono-tube dampers, this kit includes all the exceptional features of the ISC N1 coilover. The only difference is the gold anodized aluminum top plate with a rubber top mount, providing enhanced comfort without adjustable top camber plates. Furthermore, ISC coilovers are 100% rebuildable, ensuring long-lasting performance and making them a top choice for those seeking a high-quality and affordable suspension system.

 

Spring Perch Isolator Pads

Redesigned reinforced spring perch isolator pads lower friction, enabling more effective preload adjustment and an extended product life. Now includes copper-based anti-seize lubricant for coilover installation and setup.

Triple S Upgraded Coilover Springs

The ISC Triple S Upgraded Coilover Spring kit have springs made of high tensile steel, allowing for increased spring stroke, and better performing ride by having less coils per spring when compared to a standard coilover spring.

They are about 20% lighter than a standard steel coilover spring, a great upgrade for both street and track cars.

V2 Thrust Bearings
The latest V2 thrust bearings feature reduced stack height and sealed self-lubricating Japanese bearings, requiring minimal maintenance.

 

Piston Design

32-way adjustable dampening, Shafts are valved according to the spring rate, Shock dyno is used to ensure quality and consistent results.

 

Single Cylinder Configuration
Employing a mono-tube damper infused with high-pressure nitrogen, this design boasts a larger cylinder and piston setup, enhancing both driving stability and agility. The threaded section of the shaft undergoes a powder coating followed by a salt spray coating, ensuring unparalleled street durability. For added protection against harsh elements, especially in snow and salt-exposed environments, we recommend using anti-seize or similar protective products during coilover installation.

We suggest also using anti seize or other protective products when you install your coilovers for even further protection from the elements if you are exposed to snow and salt.

 

ISC Springs
Crafted from premium SAE9254 steel, these springs undergo rigorous testing, enduring over 500,000 compression cycles with minimal deformation, less than 5%.

Fully customizable spring rates (spring rates vary depending on application, custom spring rates are available).

Adjustable Ride Height
Most applications offer full-length height adjustability of up to 3 inches. Utilizing high-quality T6061 aluminum alloy for all adjustment locks ensures a lightweight design that effectively maintains spring and vehicle downforce.

Bound Adjustable with Separate Spring Locks.

Preload is separate from ride height, the lower you go, the ride quality stays the same.

 

Certifications

ISO9001, 2000R Certified and ARTC Certified.

Warranty
ISC Suspension offers a LIFETIME WARRANTY to the original purchaser against defects in workmanship and material.  For more info on this please refer to ISC Warranty.